Thompson Boat House Reconstruction. 5" x 3 1/2" color photograph of the reconstruction of Thompson's Boat House, after the fire in 1988; shows wood basement walls going up, first floor joists; Clear Lake and far shore visible in background.

Thompson Boat House Reconstruction. 5" x 3 1/2" color photograph of the reconstruction of Thompson's Boat House, after the fire in 1988; shows finished basement with main floor started; Clear Lake and far shore visible in background; unidentified construction worker is standing on floor joist.

Thompson Boat House Reconstruction. 5" x 3 1/2" color photograph of the reconstruction of Thompson's Boat House, after the fire in 1988; shows unfinished main floor, windows cut, construction workers walking on roof; cement truck parked in front pouring walkway for sidewalk; Clear Lake and far shore visible in background.

VHS videotape cassette of "Thompson's Boat House" on the shore of Clear Lake, Waseca, Minnesota; 5 min. 50 sec.; shows still photographs of the inside and outside of the business, set to music, "Dream the Impossible Dream" from "Man of La Mancha".

Waseca Police Badge. Material: metal. Size: 3" W. x 3 3/8" L. x 1/2" D. Description: sterling silver, six-pointed star shaped badge; stamped across front: "Waseca Police"; safety pin and saddle closure on reverse.

Waseca Police Department Uniform Jacket Button. Material: metal. Size: 7/8" diameter x 7/16" D. Description: gold toned metal shanked button with raised letters on convex top: "Police"; reverse side lettering: "Fechheimer Bros. Co. Cincinnati, O." Jacket Buttons, #103.80.16-28.

Waseca Police Department Uniform Jacket Button. Material: metal. Size: 7/8" diameter x 7/16" D. Description: gold toned metal shanked button with raised letters on convex top: "Police"; reverse side lettering: "Fechheimer Bros. Co. Cincinnati, O." Jacket Buttons, #103.80.16-28.

Waseca Police Department Uniform Jacket Button. Material: metal. Size: 7/8" diameter x 7/16" D. Description: gold toned metal shanked button with raised letters on convex top: "Police"; reverse side lettering: "Fechheimer Bros. Co. Cincinnati, O." Jacket Buttons, #103.80.16-28.

Waseca Police Department Uniform Jacket Button. Material: metal. Size: 7/8" diameter x 7/16" D. Description: gold toned metal shanked button with raised letters on convex top: "Police"; reverse side lettering: "Fechheimer Bros. Co. Cincinnati, O." Jacket Buttons, #103.80.16-28.

Waseca Fire Department Badge. Material: metal. Size: 1 1/2" W. x 1 3/4" L. Description: silver colored metal shield; engraved on shield: "Waseca Fire Dept 1", ladder and hook graphic in center; safety pin and saddle closure on reverse.

Special Police Badge. Material: metal. Size: 1 7/8" W. x 2 1/8" L. x 5/8" L. Description: silver colored metal, six-round-pointed star shape; engraved lettering: "Special Police"; safety pin and saddle closure on reverse.

Alderman Badge. Material: metal. Size: 1 7/8" W. x 2 1/8" L. x 5/8" D. Description: silver colored metal, six-round-pointed star shape; engraved lettering: "Alderman First Ward"; safety pin and saddle style closure on reverse.

Waseca County Police Fair; Material: metal. Size: 1 5/8" W. x 2" L. x 5/8" D. Description: silver colored metal, six-pointed star shaped badge; engraved front lettering: "Waseca County Police Fair"; safety pin and saddle closure on reverse.

Powell House Pen. Material: plastic, metal. Size: 1/2" W. x 5" L. Description: olive green plastic - two-piece shaft with silver tone metal cuff separating halves - silver lettering on bottom half: "Powell House Waseca, Minnesota, Cocktail Lounge Good Foods" - silver toned metal clip extends from upper half engraved: "Everlast" - ribbed grip section near tip.

Waseca Sleigh & Cutter Festival, 1960 Tiara. Material: metal, plastic, glass. Size: 5 3/4" W. x 5 1/2" L. x 2" H. Description: silvertone rhinestone studded half-crown with a clear plastic hair comb on each side. Waseca event: Sleigh & Cutter Festival; Sleigh and Cutter Festival.

Clara Bishman School Merit Certificate. Material: paper. Size: 2 1/8" W. x 3 1/8" L. Description: blue paper; gold graphics and printing: "Reward of Merit Presented to"; four-color floral graphic in center; handwritten at bottom: "Clara Bishman By Laura Turnacliff". School District #48, School District 48; located in Waseca County, Otisco Township.

Albert Bohl Calling Card. Material: paper. Size: 1 1/2" W. x 2 5/8" L. Description: white cardstock card with black printed name: "Albert Bohl".

St. Mary Church Altar Book. Material: textile, paper. Size: 9 3/8" W. x 12 3/8" L. x 3" D. Description: red cloth over cardboard cover - gold printed on cover: "Missale Romanum", gold stamped symbolic cross and decorative lined border - contents: about 1000 white pages of liturgical readings and intonations written in Latin - black and red print - red and black cloth loop extenders enable page turning for daily use - pink, green and purple grosgrain ribbon bookmarks extend from book.

Material: paper. Size: 5" W. x 11" L. Description: tan paper envelope - black printing - addressee: "Reg. No. 6236, Otisco, Waseca County, Minn" - postmarked: "New York, N.Y. 1-14 1885 Reg'y. Div." reverse side: brown sticker label to postmaster to note package condition.

Adam Bishman Calling Card. Material: paper. Size: 1 3/4" W. x 3 1/8" L. Description: white cardstock card with black imprint: "Mr. Adam E. Bishman".

Railroad Lodge Ribbon. Material: textile, metal. Size: 2 7/8" W. x 9 1/4" L. Description: red, green and white three-layered ribbon with metal bar at top and railroad graphic on front holding all three ribbons; safety pin closure on back; white print on lower area of ribbon: "S. Sanborn Lodge, No.139 B. of R.R. Waseca, Minn."; shorter green ribbon overlay printed in gold: "Trainmen"; clear plastic third overlay displays the lodge logo in a gold frame; black reverse ribbon side (used for funer ... more

Material: metal. Size: 1" W. x 1 1/4" L. x 1/8" thick. Description: gold tone metal - one of a set of two pins #3246 DA, DB) - anchor with entwining rope overlaid by an oak leaf and acorn - stamped: "NNC" - designed to be attached to buttonholes on the white dress uniform collar tabs (#3246) - revolver safety catch on back.

Material: metal. Size: 1" W. x 1 1/4" L. x 1/8" thick. Description: gold tone metal - one of a set of two pins #3246 DA, DB) - anchor with entwining rope overlaid by an oak leaf and acorn - stamped: "NNC" - designed to be attached to buttonholes on the white dress uniform collar tabs (#3246) - revolver safety catch on back.

Material: metal. Size: 3/4" diameter x 3/4" deep. Description: gold and silver toned metal - (one of two in set #3246 EA, EB) - link face design of gold tone ship's wheel overlaid by U.S. Navy insignia and silver eagle - backed with a hinged buttonhole prong - revolver safety catch on back.

Material: metal. Size: 3/4" diameter x 3/4" deep. Description: gold and silver toned metal - (one of two in set #3246 EA, EB) - link face design of gold tone ship's wheel overlaid by U.S. Navy insignia and silver eagle - backed with a hinged buttonhole prong - revolver safety catch on back.